Trailer Brands: Hart

The design features Hart incorporates in its trailers today have been continuously developed for over 40 years in close cooperation with our customers and dealers. Safety, reliability, convenience, eye appeal and excellence are engineered into every feature of a Hart trailer. Because Hart aspires for excellence in trailer manufacturing and service, we have been able to inspire confidence in our customers that they have made the right choice in purchasing a Hart Trailer.

Here are the Top Ten Reasons to Choose a Hart Trailer:

Designed, Built, and Sild by Horse People for Horse People

By using the trailers on a daily basis, it gives us the ability to understand our customers’ needs.

Custom Bay Built

One of the greatest advantages of choosing a Hart Trailer is the ability to design “your trailer, your way.” Your trailer can fit your individual needs and lifestyle. Hart is proud to accommodate the needs of the most discriminating horseman or horsewoman.

Name Brand Components

Hart sources components from a variety of companies in the USA. Hart uses products from major suppliers such as Dexter, Goodyear, Michelin, Alcoa, Peterson, Hehr, Equalizer, and HWH Corporation, to name a few. By using these major suppliers, Hart can maintain the level of quality that will far surpass your expectations.

Solid Side Posts

Solid upright posts on all Hart Trailers. An easy way to save money on trailer construction is to use c-shaped upright posts in the wall structure. An average consumer doesn’t notice the difference just by looking at the trailer, but the difference becomes significant over the long-term. At Hart, we do not use c-shaped upright posts because they are only 2/3 as strong as rectangular tubing of the same size. All Hart Trailers have solid posts.

Perimeter Main Frame 9

Aircraft grade aluminum unitized frame full length along the entire trailer, floor and nose, making the gooseneck structure an integral part of the trailer, rather than a stuck on after thought. Entire mainframe to flooring joints are continuously welded top and bottom to give you the ultimate in strength and durability. All structural aluminum extrusions are 6061 alloy with T6 temper to get the most muscle per ounce, 46,000 PSI structural strength, 22% stronger than steel yet only 1/3 the weight.

Hart Door System

Heavy-duty channel type door jamb and frame extrusions with inset weather stripping, for an automotive fit. Inset weather-stripping is not exposed to the elements and cannot be pulled off the edge of the door. The doors are double framed for unmatched strength and durability. Not only did Hart pioneer the channel type doorjamb system; all Hart doors regardless of size have an additional inner aluminum tubing frame for rigidity and strength. The doors are also filled with Styrofoam to insulate and deaden sound.

These heavy duty doors are welded to the trailer by hinges that consist of ¼” thick wall aluminum extrusion stock with pressed in stainless steel caps, ½” diameter stainless steel hinge pin, with stainless steel washer between upper & lower half to eliminate wear. On all full height doors we use at least four hinges, for longer life and to prevent sagging. With the Hart Door System, only the best windows are used. Our windows feature tinted automotive tempered safety glass, closed cell foam seal tape behind the full perimeter frame and are silicone sealed around the outer edge for a double seal. No other trailer manufacturer even comes close to matching the Hart Door System.

Interlocking Floor

Each flooring/cross member extrusion is tongue and grooved along each edge, interlocking each flooring section together creating the strongest flooring possible. By using a 6005 aluminum extrusion for the flooring you get the best corrosion resistance possible. 6005 aluminum extrusion is 15% more corrosion resistant than 6061 aluminum extrusions, and 40% more corrosion resistant than the common 3105 aluminum sheet alloys that are prone to sagging between cross members, holding moisture, and corroding with time. Also our flooring is .140” thick, 20% thicker than the competitions standard .125” thick extruded or sheet floors. Greater durability and longer life expectancy is the bottom line benefit.

Fully Insulated Roof

All Hart roofs are 1/2” thick fiberglass reinforced structural panels with a R3 thermal value for the ultimate in temperature, quietness, and strength. The Hart roof is a structural grade polypropylene honeycomb core material with a 1/16” layer of fiberglass resin and woven matting top and bottom, finished on the top exposed surface with a gel coat. The gel coat finish provides a high gloss panel, with long-term protection built in. Additionally, it will not dent when subjected to hail, tree limbs, or the occasional rank horse that throws its head up into the ceiling. We use it at Hart because it is simply the very best material available for a horse trailer roof. Besides, we think you and your prized livestock deserve it.

Eight Year Warranty

An eight year limited warranty to the original purchaser, eligible to be transferred to a second owner, against defects in material and workmanship arising from normal use on the superstructure consisting of the bottom rails, side posts, roof rails, roof bows, hitch frame and undercarriage frame. All other components manufactured by Hart Trailer LLC that attach to the main trailer frame, such as doors, gates, dividers or any other materials or parts are warranted to the original purchaser against any defect in materials and workmanship for one year from the date of purchase.

Family Owned for 40+ Years

Hart Trailer LLC is a family owned business that was established in 1968 by Anthony & Kay Hart. Putting the Hart family name on every trailer built is a symbol of the pride felt about the product they manufacture. Hart Trailer LLC is recognized as a leader in the trailer industry, and has become the industry standard for outstanding quality in each and every trailer built.